PLASTIC EXAMINATION ROLLS
The product is made of map tissue 100% chemical pulp 21g / m2 with an ash content of less than 1% and polyethylene film of 15 to 18 meters, packed in a roll of 50 to 100 meters and width of 25 cm. up to 70cm.
The plastic medical examination roll may have perforations per 40 cm for easy slicing at the appropriate length by the user.
Its intended use is to cover the surface of the medical examination bed, so that the patient does not come in direct contact with fluids and dirty. It therefore avoids the transmission of microbes from patient to patient. Its use is especially recommended in cases where the patient's treatment has to do with absorption of liquids.
General condition of production
The EXAMINATION ROLLS are manufactured in accordance with the requirements of international standards ISO 9001: 2000 and ISO 13485: 2003.
Factory ─ Reference to standards
The product characteristics are in accordance with the requirements of Council Directive 93/42 / EEC / 14-06-93 on medical devices.
The Risk Analysis is based on EN 1441: 1994 and ISO14971.
The indication of the product has been based on EN 980 and EN 1041 standards.
Packaging is in accordance with European Directive 94/62 / EEC of 20 December 1994 which refers to packing and way of packing
1. Technical Specifications
Α) Composition of the material:
ΕXAMINATION PLASTIC ROLL
1) Health paper 100% chemical pulp with less than 1% ash
2) POLYETHYLENE FILM 15 till 18m.
Β) Sterilization method: Non sterile product.
ExpiryDate
The above-described products have an unlimited lifetime provided that you follow the appropriate storage conditions.
Ι Ι . PACKING
1. Paper packing box
Examination Plastic rolls
Dimension 50 cm Χ 50 m
Dimension 60cm Χ 50 m
Dimension 70 cm Χ 50 m
Storage
Keep in a dry and heat-free part. Do not damage the packaging so as to be sure of the product’s hygiene.
Instructions of use
1) The products mentioned in this Technical File are of single use.
2) Τhe products should not be wet because they are destroyed.
